PWB-S10B 10000 power bank

Four decently shining blue LEDs.
When the button is pressed, the diodes indicate four battery charge levels of 100-75-50-25 %.
Automatic LED indication turn off after a few seconds.
When charging the power bank, the LED diodes indicate the ongoing charging process.

4 LEDs • DELICATE BLUE LIGHT • CLEAR INDICATION
 

The AXAGON PWB-S10B SLIM POWER BANK Li-Polymer external battery with two outputs and 10,000 mAh capacity to recharge mobile devices on the go.

The modern Li-polymer cells used are thinner, more durable and safer than conventional Li-Ion cells, and also contribute to an excellent charging efficiency of around 90 %.

The slender and completely flat body of the power bank roughly corresponds to dimensions of 5" phones. It will be great for charging as a pad.

Pleasant matte surface prevents unwanted fingerprints or slipping out of your hand.

Fast charging of connected devices (output up to 2.1 A) as well as external battery (input up to 2 A).

External battery features:
• Li-pol battery with a capacity of 10,000 mAh / 3.7 V, i.e. 37 Wh,
• input with micro USB 5pin connector, 5V DC / 2A,
• two outputs 5V DC / 2.1 A and 1 A with USB Type A connectors for charging two devices at one time,
• a lifetime minimum of 500 charging cycles (at least 80 % of the original capacity),
• projected lifetime of 700 charging cycles (when the battery usage conditions are met).

External battery control electronics functions:
• overload protection,
• short circuit protection,
• protection against voltage spikes,  
• protection against excessive discharging,
• protection against overcharging,
• automatic battery on / off for comfortable operation and saving of stored energy.

Typical charging time of a fully discharged external battery:
• approx. 6 hours from a network-based USB charger with min. 2A output (not included),
• approx. 10 hours from the USB port of a PC.

LED indications:
• four decently shining blue LEDs,
• when the button is pressed, the diodes indicate four battery charge levels of 100-75-50-25 %,
• automatic LED indication turn off after a few seconds,
• when the external battery input is connected to the USB power port, the diodes indicate the ongoing charging process.

Other features:
• The power bank body made of durable ABS plastic.
• Dimensions: 146.5 × 73 × 16 mm,
• Weight: 235 g.
• Working temperature: +5 ~ +35°C.
• Storage temperature: -20 ~ +50°C.
• Humidity: 20 ~ 85%.

Package contains:
• battery 10,000 mAh
• USB Type A-M / micro 5pin cable power adapter 15 cm long,
• a multilingual manual ENG/CZ/DE/ESP/FR/HU/IT/PL/RO/RU/SK/BG,
• packed in a cardboard box with a visibly presented product.

Notice: The actual (physical) cell capacity of this battery is 10,000mAh. However, no external battery can transfer all the energy into the battery of a mobile device without losses. In power transmission, losses occur inside the voltage converter from 3.7 V to 5 V, on the transient resistances of contacts, due to lower efficiency of energy storage in the battery of the charged device, temperature conditions, higher charging current, and the like. The actual efficiency of this battery is around 90 % at a 1A discharge current, depending on the specified conditions.