PWB-M10 10.000 power bank
Small power bank with 10,000 mAh capacity, pleasantly rounded body and LED flashlight.
| Input | micro USB |
| Output | USB type A-F, 2-port output |
| PC connection | USB type A-M, disconnectable cable, cable 20 cm |
| design | Li-pol, 10.000 mAh |
| Extra | LED Lamp |
Where to buy
Very compact AXAGON PWB-M10 10,000 mAh power bank with two outputs, LED flashlight and small rounded body for charging mobile devices on the go.
Two outputs allow charging of two devices at the same time. Fast charging of connected devices (output up to 2.4A) as well as external battery (input up to 2A).
Supports simultaneous recharging of a power bank and charging of a connected device.
Intelligent electronic six-fold protection of battery cells from all adverse effects helps to protect both the device being charged and the power bank itself.
A powerful LED can be used for long-term emergency lighting.
Small rounded body forms a durable unit for safe trouble-free transport. Pleasant matte finish prevents unwanted fingerprints.
Charging of tablets, smartphones, cameras, navigation, game consoles, and other devices that support power supply from the USB port is easier now than it ever has been.
External battery features:
• Li-pol battery with a capacity of 10,000 mAh / 3.7 V, i.e. 37 Wh,
• input with micro USB 5pin connector, 5V DC / 2A,
• two outputs 5V DC / 2.4A and 1A with USB Type A connectors for charging two devices at one time,
• support for simultaneous charging of a power bank and a mobile device,
• a lifetime minimum of 500 charging cycles (at least 80 % of the original capacity),
• projected lifetime of 700 charging cycles (when the battery usage conditions are met).
External battery control electronics functions:
• overload protection,
• short circuit protection,
• protection against voltage spikes,
• protection against excessive discharging,
• protection against overcharging,
• protection against overheating,
• automatic switching on of the power bank after connecting a charging device for comfortable operation,
• automatic switching off of the power bank after 30 seconds of being idle in order to save stored energy.
Typical charging time of a fully discharged external battery:
• approx. 5:30 hours from a network-based USB charger with min 2A output (not included).
Indications:
• Four blue LED diodes.
• The switched-off power bank when the button is pressed indicates by permanent light of diodes the four battery charge levels of 100-75 / 75-50 / 50-25 / 25-0 %.
• When charging the power bank, the diodes indicate by permanent light the achievement of the individual 25-50-75-100% battery charge levels. The last LED blinks until the battery is charged to the next level.
• When charging the device from power bank, the diodes indicate by permanent light the current battery charge level of 100-75 / 75-50 / 50-25 / 25-0 %.
• LED indication automatically turns off after approximately 5 seconds.
Other features:
• Made of durable ABS plastic, firm joining of all parts of the cover.
• The matte surface of the power bank body reduces fingerprinting.
• LED light function - pressing button for 3 seconds turns the LED on/off.
• Dimensions: 90 x 80 x 22.5 mm.
• Weight: 234 g.
• Working temperature: +5 ~ +35 °C.
• Storage temperature: -20 ~ +50 °C.
• Humidity: 20 ~ 85%.
Package contains:
• 10,000 mAh power bank,
• USB type A / micro USB 5pin power cable 20 cm long,
• multilingual manual ENG/CZ/DE/ESP/FR/HU/IT/PL/RO/RU/SK/BG,
• packed in a cardboard box.
Notice:
The actual (physical) cell capacity of this battery is 10,000mAh. However, no external battery can transfer all the energy into the battery of a mobile device without losses. In power transmission, losses occur inside the voltage converter from 3.7 V to 5 V, on the transient resistances of contacts, due to lower efficiency of energy storage in the battery of the charged device, temperature conditions, higher charging current, and the like. The actual efficiency of this battery is around 95 % at a 1A discharge current, depending on the specified conditions.
| Input | |
| input power | 2A max. / 5V DC |
| connector | micro USB female (on the power bank) |
| connector | USB Type A male (on the cable) |
| cable | 20 cm, disconnectable |
| Output | |
| number of ports | 2 |
| output power | 2.4A + 1A / 5V DC |
| connector | micro USB male (on the cable) |
| connector | 2x USB Type A female (on the power bank) |
| battery | |
| battery type | Li-Ion / 3.7 V |
| capacity | 10.000 mAh / 37 Wh |
| minimum lifetime | 500 charging cycles |
| projected lifetime | 700 charging cycles |
| Supported features | |
| charging 2 devices at the same time | yes |
| charging the power bank and device at the same time | yes |
| overload protection | yes |
| short circuit protection | yes |
| protection against voltage spikes | yes |
| protection against excessive discharge | yes |
| protection against overcharging | yes |
| protection against overheating | yes |
| automatic shutdown when charging | yes |
| automatic shutdown when idle | yes |
| Other features | |
| design | plastic |
| indication | 4x blue LED - battery charging 0-25% / 25-50% / 50-75% / 75-100% |
| controls | button: short press - turns on the battery charge status indication, 3s long press - turns the LED lamp on / off |
| LED Lamp | yes |
| dimensions | 90 × 80 × 22.5 mm |
| weight | 234 g |
Package contents
- external 10,000 mAh battery
- supply cable 20 cm long
- user manual
Manual
- printed multilingual manual ENG/CZ/DE/ESP/FR/HU/IT/PL/RO/RU/SK/BG
Product package
- cardboard box
- package dimensions 16.5 x 10 x 4 cm
- weight of 1 pc package 286 g
- EAN 8595247903761
Export package
- number of pieces in the box: 40
- total weight of the box: 11.95 kg G.W.
- box dimensions: 38.5 x 34 x 23 cm
FAQ
A): We recommend using the original micro USB cable supplied with the power bank.
B): The original cable has stronger conductors and less resistance. This minimizes charging losses. General cables for phones may have smaller diameter conductors, which may cause slower or interrupted charging. Such cables are designed for synchronization (data connection) and are not suitable for charging.
A): The capacity of the power bank is determined by the actual (physical) capacity of the battery cells that the power bank is equipped with.
B): The internal power bank batteries have a voltage of 3.7 V. To charge the phone, this voltage needs to be converted to 5 V, which is the standard for USB interface. In the charged device (such as a mobile phone or tablet), conversion from 5 V to 3.7 V is in turn needed to charge the internal batteries. With each voltage conversion, losses occur (most often in the form of heat), which are usually 5 to 15 %. As a result, the energy that the charged device is able to take is after necessary conversion of voltage of the two devices reduced by 2 x 5 % to 2 x 15 % and the efficiency of charging reaches 70 to 90 %.
A): Fast charging must be supported also by the equipment being charged - e.g. cell phone, tablet etc.
B): If charging from an external battery lasts approximately as long as from the charger, it means that the device does not have a fast charging function.
A): We recommend that you do not discharge the power bank completely to zero and do not let it run out of power for a long time.
B): If you want to extend the life of your power bank, do not discharge it to zero. It is good to leave about 10 to 25 % of its capacity. If the power bank is discharged, we recommend recharging it in the shortest possible time. Never store the power bank in a discharged state. As soon as you start charging the power bank, do not interrupt charging. Interrupted charging again reduces the life of your power bank.
PWB-L10
PWB-L10QD
