HUE-S2BP USB3.0 CHARGING hub

Four-port USB 3.0 hub with power adapter included and fast charging support. Cable 1.2 m.


Input USB 3.0
Output USB 3.0, 4-port output
PC connection USB type A-M, permanently connected cable, cable 1.2 m
Power supply on the bus, through power adapter
Extra fast charging

Where to buy






The four-port USB 3.0 hub easily and quickly connects up to four USB devices simultaneously to your computer.
Included in the package is a power supply/charger with USB type-A 5V/2A output and 1.5 m micro USB cable. The advantage of this solution is the possibility to use the supplied charger and cable universally, for example to charge the mobile phone or tablet directly. You can both charge and transfer data over the micro USB cable at one time.


4 PORTS • USB 3.0 • UNIVERSAL USB CHARGER 5V - 2A



A permanently attached 1.2 m long USB cable is sufficient even if you need to connect a USB hub placed on your table with a desktop computer placed under the table.
The small lightweight four-port USB hub with an elegant, matte plastic body is truly versatile.


LONG FIXED USB CABLE • MINI & LIGHWEIGHT • MATTE SURFACE



Mobile phones, tablets, power banks and other devices can be charged up to 2A in any hub port thanks to the USB Battery Charging 1.2 support.
It also allows charging of iPad tablets even without auxiliary power supply with approx. 1A (iPad mostly cannot be charged directly from the USB 3.0 ports on the PC).
After turning off the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub.


USB BATTERY CHARGING 1.2 • FAST CHARGING UP TO 2A



It can even handle permanent connection of several 2.5" external disks without external hub power.
After connecting the power adapter, you can also work with up to three external 2.5" magnetic drives at the same time.
However, we recommend that you connect max. 2 external 2.5" disks simultaneously for reliable long-term hub operation.


2HDDs & USB POWER • UP TO 3 HDDs & SELF POWER



The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of even large USB devices.
The USB ports located at the top of the hub allows for easy insertion of flash disks, for example, with only one hand.
The top port is also suitable for connecting a wireless adapter for better signal reception.


USB PORTS ON TOP • SMART PLACING


The four port AXAGON HUE-S2BP USB 3.0 hub with a 1.2 m long USB cable, power adapter and fast charging support on all ports.

A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time.

The permanently attached 1.2 m long USB cable is suitable for use with a desktop computer.

Included in the package is a power supply/charger with USB type-A 5V/2A output and 1.5 m micro USB cable. The advantage of this solution is the possibility to use the supplied charger and cable universally, for example to charge the mobile phone or tablet directly.

Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support.

It can even handle permanent connection of several external disks without external hub power. When power adapter is connected, you can even work with three external disks at one time.

The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices.

It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected.

Features:
• 4 downstream USB 3.0 ports with enough space around the connectors.
• an upstream USB 3.0 port with USB 3.0 Type A male connector on a 120 cm long permanently attached cable.
• Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1.
• Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed).
• Supports USB Battery Charging v 1.2 specification.
• Included in the package is power supply with USB type-A 5V/2A output and 1.5 m micro USB charging
& data cable.
• Each hub port can be used to charge up to 2A (with an external USB charger connected).
• The iPad charging support up to 2A (with an external USB charger) or up to 1A (without external power supply).
• Possibility to connect your device while running thanks to the Hot Plug support.
• Full Plug and Play support.
• LED indication of hub connection to power supply.
• Current overload detection and protection.
• Hub dimensions 96 x 32 x 22 mm, USB charger dimensions 22 x 36 x 76 mm including the fork.
• Hub weight 76 g (incl. cable), USB charger weight 36 g ((without USB cable).

The hub power mode via USB cable (bus power):
• The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports.
• In this power mode, the USB hub is also able to cope with up to two magnetic 2.5" external disks simultaneously.
• Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9 A, in some cases 1A (depending on the computer).

The hub power mode via the included USB charger (self power):
• In this power mode, the USB hub is able to cope with three magnetic 2.5" external disks. However, we recommend that you connect max. two external 2.5" disks simultaneously for reliable long-term hub operation.
• Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current 2A of the external power adapter.

Independent charging hub mode without being connected to the PC (charging hub):
• After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub.
• Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current 2A of the external power adapter.

OS support:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (supported are all 32 and 64-bit Windows OS versions), Mac OS X 10.4x and higher, Linux with kernel 2.6.x and above.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.

Package contains:
• USB 3.0 hub with a permanently connected 120 cm long cable,
• universal power adapter / charger with USB 5V/2A output,
• universal charging and data cable USB type A male / micro USB male, 150 cm long,
• printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA
,
• packed in a cardboard box.

Input
interface USB 3.0 / USB 2.0 / USB 1.1
rate 5000 / 480 / 12 / 1.5 Mbit/s (super / high / full / low speed)
connector USB Type A male on the cable
cable 1.2 m, permanently connected
Output
interface USB 3.0
number of ports 4
connector USB Type A female
Supported features
fast charging yes (up to 2 A)
overload protection yes
automatic installation yes
Plug and Play yes
Hot Plug yes
Other features
compatibility USB Battery Charging v 1.2
indication white LED - connection to power supply (permanently on)
dimensions 96 x 32 x 22 mm
weight 76 g (incl. USB cable)
Power supply
on the bus yes (USB bus power)
through power adapter yes (power adapter included)
OS support
MS Windows 10 / 8.1 / 8 / 7 / Vista / XP (all 32- and 64-bit versions)
MS Windows Server 2016 / 2012 / 2008 / 2003 (all 32- and 64-bit versions)
Mac OS X 10.x and higher
Linux kernel 2.6.x and higher

Package contents

- USB hub with a permanently connected 1.2 m cable
- universal power adapter / charger with USB output
- universal charging and data cable USB
- installation guide


Power adapter

- power adapter / charger with USB Type A output 5V/2A
- with an integrated two-pin Euro fork


Cable

- charging and data cable USB
- USB Type A male and micro USB male connectors
- 150 cm long


User Manual

- printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA


Product package

- a cardboard box
- package dimensions 14.2 x 14.5 x 3.6 cm
- weight of 1 pc package 215 g
- EAN 8595247903679


Export package

- number of pieces in the box: 50
- total weight of the box: 11.8 kg G.W.
- box dimensions: 48 x 32 x 30,5 cm


FAQ

A): The necessary drivers are already included in all operating systems and install completely automatically, and no additional drivers are needed.

B): Plug the USB hub into another USB port (on the back of the computer where the USB ports are integrated directly into the motherboard). It should re-detect the USB hub and reinstall the drivers. Alternatively, try replacing the USB cable. The obsolete driver of the USB controller could also cause problems. Manufacturers of USB 3.0 chipsets often issue new versions of drivers to improve compatibility with different devices. If the problem with the USB bub persists, plug it into the USB port of another computer to verify its functionality.

A): The phone / tablet cannot be powered by an OTG cable, this is given by the OTG principles. The tablet can be connected to a charger by a normal cable and charged itself or devices can be connected to it with an OTG cable

B): Phones / tablets that have a power connector located outside the microUSB have an advantage - here the tablet can be powered through a round connector and connect other peripherals (mouse, keyboard, flash disk, etc.) to the microUSB using an OTG cable (via the USB hub).

A): In the vast majority of cases, the USB hub can handle connection of one 2.5" external box. If more external boxes are connected, a higher current is needed that ordinary USB cannot deliver.

B): In this case, an auxiliary power supply is required. Use a USB hub with auxiliary power supply.

A): You can use a passive USB cable to connect a USB hub to your computer. However, with longer cables the USB hub may not work reliably.

B): In this case, we recommend using an active extension USB repeater cable, such as AXAGON ADR-205 or ADR-210.

User Manual



Technical support inquiry





We provide technical support only in Czech and English. Thank you for your understanding.