CRE-S2C USB-C 3.1 external reader
Slim super-speed USB 3.1 card reader with a direct USB-C connector.
| Input | USB 3.2 Gen 1 |
| Card slots | 2 slots, SD, microSD |
| PC connection | USB type C-M, integrated connector |
| design | external |
Where to buy
AXAGON CRE-S2C SLIM USB-C 3.1 memory card reader supports all current SD and microSD card versions including SDXC and microSDXC up to 2 TB.
The reader can be used with both computers and laptops, as well as mobile phones and tablets that support OTG and USB-C connectivity.
The modern two-sided USB Type C connector makes it easy to use the reader, eliminating the need to properly orient the connector when plugged into a computer or phone.
Thanks to the USB 3.1 Gen 1 / USB 3.0 interface, the reader delivers significantly higher transmission speeds for SD UHS-I cards compared to USB 2.0 readers.
The installation can be handled even by a layman - only plug the reader into the USB port of the computer or mobile device and the rest is done automatically.
The card reader - two slots supporting the following formats:
• Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,
• SD slot: SecureDigital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro.
The reader supports the following flash card specifications:
• SD 1.0/1.1 (SD - Secure Digital, up to 2 GB),
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32 GB),
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2 TB),
• MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit).
• Supports SD 3.01 and SD Jukebox applications (CPRM features).
• Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speed up to 104 MB/s.
• Supports hardware ECC (Error Correction Code) feature and CRC (Cyclic Redundancy Check) feature.
• 1 LUN - in file managers, the reader is indicated as one disk drive.
• Supports FAT 12/16/32, NTFS, exFAT (FAT 64) file formats.
Other features:
• Fully compatible with USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0 and 1.1.
• Supports transmission rates 12 / 480 / 5000 Mb/s (low / full / high speed).
• Full Plug and Play and Hot Swap support.
• Connection via USB Type C male connector.
• The power supply of the reader is via USB bus (bus-power).
• A blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking).
• Dimensions 65 x 21 x 10 mm.
• Weight 9 g.
Supported operating systems:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.4.x and above, Android all versions.
• Note: Drivers are included with supported operating systems and are installed completely automatically.
Package contains:
• USB-C 3.1 card reader,
• USB connector cap,
• packed in a heat sealed blister with the installation guide.
| Input | |
| interface | USB 3.1 Gen 1 / USB 3.0 / USB 2.0 / USB 1.1 |
| rate | 5000 / 480 / 12 Mbit/s (super / high / full speed) |
| connector | USB Type C male in-built |
| cable | no |
| card reader | |
| number of slots | 2 |
| SD slot | SD / SDHC / SDXC, MMC, MMC mobile, RS-MMC, with adapter miniSD / miniSDHC / MMC Micro |
| microSD slot | microSD / microSDHC / microSDXC / TransFlash |
| Supported features | |
| automatic installation | yes |
| specification of SD flash cards | SD 1.0 / SD 1.1 (SD - Secure Digital, up to 2 GB) |
| specification of SD flash cards | SD 2.0 (SDHC - Secure Digital High Capacity, up to 32 GB) |
| specification of SD flash cards | SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2 TB) |
| specification of MMC flash cards | 3.x/4.x/5.0 (8-bit) |
| file formats | FAT 12/16/32/64, NTFS, exFAT (FAT 64) and others |
| Plug and Play | yes |
| Hot Plug | yes |
| Hot Swap | yes |
| Other features | |
| indication | blue LED - connection to the USB port of the computer (permanently on), data transmission (flashes) |
| number of icons | 1 LUN - the reader appears as one drive in file managers |
| dimensions | 65 x 21 x 10 mm |
| weight | 9 g |
| Power supply | |
| on the bus | yes (USB bus power) |
| OS support | |
| MS Windows | 10 / 8.1 / 8 / 7 / Vista / XP (all 32- and 64-bit versions) |
| MS Windows Server | 2016 / 2012 / 2008 / 2003 (all 32- and 64-bit versions) |
| Mac OS | X 10.x and higher |
| Linux | kernel 2.4.x and higher |
Package contents
- USB-C 3.1 card reader
- USB connector cap
- installation procedure specified on the packaging
Product package
- blister stuck between paper cards
- package dimensions 15,5 x 11,5 x 1 cm
- weight of 1 pc package 28 g
- EAN 8595247903808
Export package
- number of pieces in the box: 250
- total weight of the box: 7.65 kg G.W.
- box dimensions: 47 x 30 x 26 cm
FAQ
A): Drivers are included with operating systems and are installed completely automatically. The card reader is detected as a standard storage device, such as a USB flash disk, no other drivers are available.
B): No other drivers need to be installed and are not even available. If you continue to have problems with your reader, check out more tips that can help you troubleshoot problems.
A): If the card reader is not displayed in "Device Manager," there may be a USB port (or a 20-pin USB 3.0 connector on the PC motherboard in the case of an internal reader) malfunction.
B): Try plugging the reader into another USB port (or another 20-pin USB 3.0 connector on the PC motherboard, if available, in the case of an internal reader). The card reader should be detected and the drivers loaded automatically. If this does not solve the problem, try checking the USB controller status in "Device Manager" in the "USB Drivers" section. If the problem persists, plug the card reader into the USB port of another computer to verify its functionality.
A): If this happens, it means that the operating system failed to get the necessary information to install the drivers.
B): The cause may be a defective USB cable or damaged device. Another option is to remove the record of the connected USB device using "USBDeview". After connecting the reader, the drivers should be reloaded. If the problem is caused by a driver error, the problem should be eliminated. If the problem persists, plug the card reader into the USB port of another computer to verify its functionality.
A): If this happens, it means that the Windows operating system did not assign a drive letter to the new storage device.
B): If the drive letter is not assigned, open "Disk Management", right-click on the desired drive and manually assign the drive letter. Another option is that the correct formatting of the memory card is not performed. Format the card in "Disk Management" or in the device on which you are using the card (for example, the camera).
